Grind and Seal Flooring
Florence, Athens, Madison, Huntsvilleand Southeast United States
Commercial and industrial concrete floors
Request a quote
Renew worn concrete without replacing the slab
Grind and seal flooring turns worn, stained concrete into a clean, durable finished floor. We grind the surface with diamond tooling, repair damage, and apply a protective sealer, so the slab you already have becomes the floor.
Pros LLC installs grind and seal floors for warehouses, retail spaces, offices, showrooms, and industrial buildings across North Alabama and the Southeast. We're a family-owned, OSHA-certified general contractor, licensed with the State of Alabama, insured, and bonded. For slabs with significant low spots, we also offer floor leveling.
See what grinding and sealing changes
Drag across the sample to compare a worn slab with the same floor after grinding, repair, and sealing. Then try different sealer sheens and colors.
This is an illustration. Results depend on your slab, and we'll show you real finish options during your estimate.
Why facilities choose grind and seal
It's one of the most practical upgrades for existing concrete: a cleaner look, better protection, and easier upkeep, without tearing out the slab.
-
Restores worn concrete
Refresh an aging slab instead of replacing it, and extend the useful life of the floor you already have.
-
Protects the surface
The sealer helps guard against stains, abrasion, moisture, dust, and the demands of daily commercial traffic.
-
Cleans up easier
A sealed surface is easier to sweep and mop than bare concrete, and it cuts down on concrete dust.
-
Looks finished
Keep a natural concrete look or add a decorative stain, with a sheen anywhere from matte to high gloss.
-
Fits tighter budgets
Because the existing slab becomes the finished floor, it's among the most cost-effective ways to upgrade concrete.
-
Starts with real prep
Mechanical grinding creates the clean, consistent surface a sealer needs to bond well and wear evenly.
Where it works
- Retail facilities
- Warehouses
- Offices
- Industrial buildings
- Showrooms
- Other high-use commercial spaces
How grind and seal works
Grinding removes imperfections, old coatings, stains, and surface irregularities. Once the finish is right, a protective sealer goes down to guard the concrete against wear, moisture, staining, and traffic.
-
Assess and quote
We check the slab's condition, old coatings, stains, and cracks, then give you a same-day estimate and handle required permits.
-
Grind the surface
Diamond grinding removes old coatings, surface stains, and irregularities, and opens the concrete for the sealer.
-
Repair damage
Cracks and spalls are filled so the finished floor is sound and consistent across the space.
-
Clean and seal
We remove grinding dust and apply the protective sealer in the sheen and color you chose.
-
Walk the floor
We inspect the finished floor with you and share cleaning and care guidance for your sealer.
Grind and seal, polished, or epoxy?
All three start with ground concrete. The right choice depends on how much protection, shine, and color your space needs. Here's how they typically compare.
| Grind and sealThis page | Polished concrete | Epoxy floor system | |
|---|---|---|---|
| Finish | Natural concrete look with a sealer sheen from matte to high gloss | High-shine natural concrete, refined through progressively finer grinding | Solid color, flake, quartz, or metallic coating that covers the slab |
| What protects it | A sealer applied over the ground surface | The densified, polished concrete surface itself | A thick, seamless resin coating |
| Durability | Stands up to everyday commercial traffic and helps resist stains and dust | Very hard-wearing under heavy foot traffic | Most resistant to chemicals, spills, impact, and heavy equipment |
| Upkeep | Routine cleaning, with resealing over time in high-traffic areas | Routine cleaning and periodic burnishing to keep the shine | Routine cleaning, with the topcoat protecting the system |
| Relative cost | Typically the most budget-friendly | Varies with the level of shine | Higher upfront, depending on the system |
| Best for | Warehouses, retail, offices, and budget-conscious upgrades | Showrooms, retail, and large open spaces | Manufacturing, food and beverage, medical, and decorative spaces |
| Next step | Get a same-day estimate | Types of commercial flooring | Epoxy floor systems |
Swipe sideways to compare all three.
What our customers say
Straight from the people who've hired us, on floors and projects across the region.
“Great customer service and sense of urgency with completing each task! You won't find a better team to take your flooring to the next level!”
“PROS GC and Adam Brown have been amazing to work with. They get the job done right the first time.”
“From start to finish the entire process with PROS LLC was excellent. The guys are very knowledgeable and did an outstanding job throughout our job.”
“These guys do outstanding work. Meticulous attention to detail, top notch communication and deliver on their promises.”
Grind and seal questions
Have a question that isn't here? Call (256) 762-1193.
What is grind and seal flooring?
It's a finish for existing concrete. The surface is mechanically ground with diamond tooling to remove imperfections, old coatings, and stains, then a protective sealer is applied to help guard against wear, moisture, staining, and traffic.
How is grind and seal different from polished concrete?
Polished concrete gets its shine by grinding through progressively finer grits and densifying the surface. Grind and seal gets its protection and sheen from a sealer applied after grinding, which usually makes it the more budget-friendly option.
How is grind and seal different from an epoxy floor?
Epoxy is a thicker coating that covers the concrete with a solid color or decorative finish and offers more resistance to chemicals, impact, and heavy equipment. Grind and seal keeps the natural look of your concrete and costs less upfront.
Will grinding remove all stains and damage?
Grinding removes many surface stains, old coatings, and imperfections, but deep stains and past repairs can still show through a natural concrete finish. We repair cracks and spalls before sealing and explain what to expect during your estimate. For significant low spots, we also offer floor leveling.
Can I choose the sheen or color?
Yes. Sealers are available in finishes from matte to high gloss, and decorative stains can add color while keeping the character of the concrete.
How do I maintain a grind and seal floor?
Regular sweeping or dust mopping and routine cleaning with a pH-neutral cleaner keep the floor in good shape. In high-traffic areas, the sealer can be reapplied over time to maintain protection and appearance. We share care guidance for your sealer when the job is done.
How long does installation take?
It depends on the square footage, the condition of the slab, and the sealer. Because there's no multi-coat build, grind and seal is often quicker than a full coating system. Your estimate includes a project timeline.
Do you install grind and seal in homes?
No. Pros LLC focuses on commercial and industrial flooring, including warehouses, retail spaces, offices, showrooms, and industrial buildings.
How do I get an estimate?
Call (256) 762-1193 or request a quote online. We offer same-day estimates for commercial and industrial concrete floors.
Give your concrete a better finish
Tell us about your floor, and we'll give you a same-day estimate for grind and seal or the system that fits best. Serving Florence, the Shoals, Huntsville, Birmingham, Tuscaloosa, and the Southeast. View our serving area